A grinding wheel is an expendable wheel that is composed of an abrasive compound used for various grinding (abrasive cutting) and abrasive machining operations. They are used in grinding machines.

Cut off wheels, also known as parting wheels, are self-sharpening wheels that are thin in width and often have radial fibers reinforcing them. They are often used in the construction industry for cutting reinforcement bars (rebar), protruding bolts or anything that needs quick removal or trimming.

Abrasives Mounted Points are used in all foundries , heavy engineering and machine shops, tool rooms and in the construction industry. they are used for blending tools and dies, debarring and enlarging of holes, fettlings of castings and many more operations where removal of excess material is required.

Emery paper is a type of sandpaper that can be used for sanding down hard and rough surfaces. It can also be used for resistant technology purposes to give a smooth, shiny finish to manufactured products and is often used in the finishing of high-end watch movements.

The most heavy-duty of coated abrasive discs with resin over resin construction on heavy-duty vulcanized fiber backing. Designed for applications ranging from heavy stock removal to surface blending. Used with back-up pads on portable angle grinders.

Flap Discs are designed for use on portable grinders gauge sheet metal or stainless steel where finish is important center grinding wheels, and are the preferred option on light abrasive fiber discs.

A flap wheel and the related flap disk is an abrasive disk, used for metal finishing. Unlike the simpler flat disks, made from a circular flat sheet of a coated abrasive, a flap wheel is made of multiple overlapping small pieces or 'flaps', bonded to a central hub.

An angle grinder, also known as a side grinder or disc grinder, is a handheld power tool used for cutting, grinding and polishing.

A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using a rotary motion spinning around an arbor.

A bench grinder is a type of bench top grinding machine used to drive abrasive wheels.

A heat gun is a device used to emit a stream of hot air, usually at temperatures between 100°C and 550°C (200-1000°F), with some hotter models running around 760°C (1400°F), which can be held by hand.

A chainsaw (or chain saw) is a portable, mechanical saw which cuts with a set of teeth attached to a rotating chain that runs along a guide bar. It is used in activities such as tree felling, lambing, bucking, pruning, to fell snags and assist in cutting firebreaks in wild land fire suppression, and to harvest firewood.

A cordless drill is an electric drill which uses rechargeable batteries. These drills are available with similar features to an AC mains-powered drill.

Rotary hammers, also called "combo drills," are similar in that they also pound the drill bit in and out while it is spinning. However, they use a piston mechanism instead of a special clutch. This causes them to deliver a much more powerful hammer blow.

A router is a tool used to rout out (hollow out) an area in the face of a relatively hard work piece, typically of wood or plastic. The main application of routers is in woodworking, especially cabinetry.

A demolition hammer is a powerful tool meant to break down floors or large walls made of concrete.

A device, usually motor-driven, fitted with an end cutting tool that is rotated with sufficient power either to create a hole or to enlarge an existing hole in a solid material.